Solution

2022-11-04

The drum pressure shall be properly adjusted for food packaging bag printing; If the ink color is too heavy and the solid bottom is too large, it is easy to stick the ink roller. Before printing, reduce the pressure on the cylinder, and add more additives or track adhesives to the ink to ensure uniform pressure. If you are not careful when printing the packaging bag, it will crush the rubber; If the ink color is too heavy and the solid bottom is too large, the rubber or the ink roller will be stuck. Therefore, before printing, reduce the pressure on the drum and the lining inside the rubber. In order to avoid sticking rubber and rolling rubber, add more additives or rutting adhesives to the ink, and at the same time, keep an eye on it. Avoid double sheets, multiple sheets and paper tilt, and ensure that the pressure is uniform and does not roll rubber.

Solution

2022-11-04

The drum pressure shall be properly adjusted for food packaging bag printing; If the ink color is too heavy and the solid bottom is too large, it is easy to stick the ink roller. Before printing, reduce the pressure on the cylinder, and add more additives or track adhesives to the ink to ensure uniform pressure. If you are not careful when printing the packaging bag, it will crush the rubber; If the ink color is too heavy and the solid bottom is too large, the rubber or the ink roller will be stuck. Therefore, before printing, reduce the pressure on the drum and the lining inside the rubber. In order to avoid sticking rubber and rolling rubber, add more additives or rutting adhesives to the ink, and at the same time, keep an eye on it. Avoid double sheets, multiple sheets and paper tilt, and ensure that the pressure is uniform and does not roll rubber.

Solution

2022-11-04

The drum pressure shall be properly adjusted for food packaging bag printing; If the ink color is too heavy and the solid bottom is too large, it is easy to stick the ink roller. Before printing, reduce the pressure on the cylinder, and add more additives or track adhesives to the ink to ensure uniform pressure. If you are not careful when printing the packaging bag, it will crush the rubber; If the ink color is too heavy and the solid bottom is too large, the rubber or the ink roller will be stuck. Therefore, before printing, reduce the pressure on the drum and the lining inside the rubber. In order to avoid sticking rubber and rolling rubber, add more additives or rutting adhesives to the ink, and at the same time, keep an eye on it. Avoid double sheets, multiple sheets and paper tilt, and ensure that the pressure is uniform and does not roll rubber.